Price ListCreate AccountLog In
Prod code: CREO4LTDARK

4LT CREOTREAT

£8.80£10.56 inc vat

available for collectionAvailable for collection at Shay Lane Industrial Estate
available for collectionAvailable for collection at Woodsfold Sawmill
available for deliveryAvailable for delivery

Cromar Creotreat Wood Preserver Description: Dark Brown + Light Brown Cromar Wood Preserver Dark + Light Brown can be used for the protection of external timbers such as fences, pots, sheds etc, against fungal attack. Use of these preservers on timber which will come into contact with plant life is not recommended. Treated timber is not suitable for subsequent varnishing or overpainting.

Preparation: Ensure that the timber to be treated is fully dry and that paint or varnish will not restrict penetration. Replace rotted timber, cutting back to sound areas. Cure sources of dampness and treat dry rot (and surrounding areas) on brickwork and masonry with two coats of Cromar Woodworm + Dry Rot Killer. N.B: Be sure to read all conditions relating to use and safety listed on the container before commencing work.

Application: Before start, ensure that the cap is firm and shake container vigorously to thoroughly mix contents. Apply to the prepared surface two liberal coats of Cromar Wood Preserver (chosen colour or type) by brush or low-pressure spray, ensuring saturation of joints and end grain. Alternatively dip for 10-15 minutes. If timber is to be used below ground level, the dipping time should be increased to one hour or three brush coats should be used. Sufficient time should be allowed between coats to permit penetration of the preserver, before applying next coat.

N.B: Please note that the final colour, when dry, will depend of the type of wood to which it is applied and whether any previous application of coloured preservative or Creotreat has been made. In such instances, we recommend a test area to ensure that the finished result is acceptable.

Coverage Rates: This is greatly dependent on the type of timber being treated, but as a rough guide coverage will be 6 to 8m² per litre for each coat. Cleaning: Brushes etc. can be cleaned with White Spirit followed by detergent. Storage Conditions: Containers should be stored out of direct sunlight in dry conditions away from sources of ignition. They should be stored undercover below a temperature of 35°C.

Review This Product
4LT CREOTREAT
*Required Fields

Your Rating:

Fox Timbers' Featured Products

HALF PALED HALF BOARDED HARDWOOD ARCH TOP
HALF PALED HALF BOARDED HARDWOOD ARCH TOP 3`0 WIDE 3`0 TALL RISING TO 3`6
From
£336.00
EYEBOLTS 10MM
EYEBOLTS 10MM 250MM X 10MM EYEBOLTS
From
£1.05
GALV RING LATCH 6
GALV RING LATCH 6" TWISTED

£15.65
HEAVY DUTY DROP OVER FRAME GALV GATE
HEAVY DUTY DROP OVER FRAME GALV GATE

£31.25
NEW ZEALAND CATCH
NEW ZEALAND CATCH

£5.70
FLAKE GATE STAPLES 100 MM
FLAKE GATE STAPLES 100 MM

£4.50
REDWOOD COLONIAL SPINDLE 41 X 41 MM X 900 MM
REDWOOD COLONIAL SPINDLE 41 X 41 MM X 900 MM

£1.85
SAWN FENCE POSTS TANALISED
SAWN FENCE POSTS TANALISED 1.35 X 75 X 75 SAWN TAN POSTS POINTED FSC MIX 70%
From
£2.75
FENCING PLIERS
FENCING PLIERS

£16.50
MONKEY TAIL BOLTS 18
MONKEY TAIL BOLTS 18" 5/8" SHOOT GALV

£9.90
Fox Blox Nationwide DeliveryOpening Times